2012 Price List and Ordering Information

---

To order products from EME Systems:

Please fax, email or call in the order to us. We accept qualified purchase orders, and we accept payment by check, wire, or credit card  (Visa, Mastercard, American Express.   Shipping charges dependent on destination and level of service.  Most convenient is UPS.   Additional fees (~$40) apply for export paperwork and handling.  

mailto:orders@emesystems.com

fax: (510) 848-5748
voice: (510) 848-5725

 

Back to Product Index

• Light Sensor & Amplifier Prices
• Temperature, Humidity & Moisture Sensor Prices
• OWL2pe data logger prices
  
• Stache Microprogrammer Prices
• Accessories Prices
• Davis Instruments Prices
• Bat-Hat Prices
  

 

Manufacturer Code	Description	Price ($US)

Light Sensors and Amplifiers
	Amplifiers	-
	UTA - Li-COR sensor input, to voltage output
UTA	UTA rev.b with polycarbonate enclosure	$130
/BNC	BNC connector on input	add $10
/xxx	preset input for LIxxx= 190, 200 or 210	no charge
/v	preset output for  1, 2, 5, or 10 Volts	no charge
/gain=xxx	or preset gain factor from UTA chart	no charge
/hobo	preset output range of 2.5 volts for Onset HOBO data logger	no charge
/NE	no enclosure; amplifier electronics only	subtract $15
HOBO VIC	HOBO Voltage input cable for use with UTA/HOBO	$8
	UCLC- Li-COR sensor input, to current loop output
UCLC	standard UCLC with polycarbonate enclosure	$130
/BNC	BNC connector on input	add $10
/xxx	preset input for LIxxx= 190, 200 or 210	no charge
/i	preset output for high gain (3.5µA fs)	no charge
/NE	no enclosure; amplifier electronics only	subtract $15
	USEA - small voltage input, to voltage output
USEA	standard USEA with polycarbonate enclosure, grips	$130
/BNC	BNC connector on input	add $10
/gain	preset standard gain x2 to x1500 from chart	no charge
/regulator	special voltage regulator (see manual)	add $10
/hobo	special for use with Onset HOBO data logger, 2.5 V power	no charge
/offset	offset adjustment, set to a millivolt level	add $20
/NE	no enclosure	subtract $15
Light Sensors
LI-190SZ	quantum PAR sensor; 10' cable, ends stripped and tinned	$470
LI-190SA	quantum PAR sensor; 10' cable, BNC termination	$485
LI-200SZ	pyranometer for wide band energy and heat load; 10' cable, ends stripped and tinned	$255
LI-200SA	pyranometer for wide band energy and heat load; 10' cable, BNC termination	$280
LI-200SZ-50	pyranometer for wide band energy and heat load; 50' cable, ends stripped and tinned	$305
LI-200SA-50	pyranometer for wide band energy and heat load; 50' cable, BNC termination	$330
LI-210SA	photometer for human vision; 10' cable, BNC termination	$550
LI-193SA	underwater spherical quantum sensor; requires 2222UWB underwater cable	$930
LI-COR 2003S	leveling fixture	$68
LI-COR 2222UWB	underwater cable, 3, 10, 30, 50, 100 meters	call, base price $450

Temperature, Humidity, Moisture Sensors
-	Temperature Probes	-
TF/10	Fahrenheit output, 10 foot cable	$85
TF/30	Fahrenheit output, 30 foot cable	$95
SHT75PG	digital RH/°C in PG7 gland	$115
SHT75PG/3m	digital RH/°C  probe with 3m cable	$155
SHT15DV	digital RH/°C for mounting in Davis 7714 radiation shelter.	$125

LWET	standard LWET, 10' cable	$95
/P	painted	no charge
-	Irrometer® Watermark soil moisture sensor	-
I200SS-5	watermark™ sensor, 5 feet cable	35.00
-	SMX Modules	-
SMX-oem	OEM moisture transmitter for Watermark sensors, unencapsulated	24.00
SMX	encapsulated (weatherproof) SMX	70.00

OWL2pe
-	data logger	-
OWL2pe oem	OWL2pe core module, v1.6	1–4) $185 5–49) $175 50–99) $145 100-) $130
TB1048	Breakout terminal board for the OWL2pe,  48 Phoenix screw-down connection terminals, includes solar battery charger, 5 independent counter channels, and input protection.	$160
TB1032	Breakout terminal board for the OWL2pe,  32 Phoenix screw-down connection terminals,  input protection.	$85

STACHE	Microprogrammer for the Parallax Basic Stamp® II with firmware version 1.7b	$110
CT515	5 channel counter and debouncer for rain gage, anemometer or flow meter.	1–4) $8 5–9) $7 10–24) $6.50 25–) $5.50

Solar Panels, Batteries, Chargers
-	Batteries & Chargers	-
B1207	12 volt, 7 amp-hour gel cell battery	$35
CG1129	12V solar float charger for 1-7aH SLA battery	$85
-	Solar Panels	-
SP5	Solar panel with mounting bracket 5 watt, Pmax 17.5V  @ 280mA, 8" x 11"	$120
SP10	Solar panel with mounting bracket 10watt, Pmax 17.5V @ 600mA, 12" x 14"	$180
SP20	Solar panel with mounting bracket 20watt, Pmax 17.5V @ 1200mA, 12" x 18"	$215

DAVIS INSTRUMENTS
-	Anemometers	-
DV6410	Vantage Pro II anemometer mounts on the side of the mast support	$155
DV7903L	replacement wind cups, large size	$15
DV7903S	replacement wind cups, small size	$15
-	Rain Gages	-
DV7852M	Rain Collector II, metric, 0.2 mm per tip	$105
D7852	Rain Collector II, 0.01 inch per tip	$105
-	Radiation Shields	-
DV7714	passive radiation shield	$85
/A	assembled	add $15
------ Link to Davis Instruments page ----

Bat-Hat system and accessories
	Microphone protection system
Bat-Hat	bat-hat with preamp, shroud, bracket #1a, 1b or 1c, and reflector. (Cable cost is separate, see below.)	310.00
/m	meters, Canare 4E5AT Star Quad audio cable,	$3.00 per meter
/c/m	meters, 4E5C Star Quad audio cable (stranded braid shielding for electically noisy locations)	$3.50 per meter
/b1a or /b1b or /btm	standard one-piece bracket (see diagrams)	choose option
/b3b	two piece bracket with extra support leg	add $7
	Bat-Hat Accessories
EFG1008BH	Fiberglass NEMA4 Enclosure 8"x10"x4", with SS hinge and hasp, prepared for Anabat(s), battery and charger.	$245
B1207	Sealed Pb-acid battery, 12 Volt, 7 Ah	$35
CG1129BH	Battery charger for solar to 12 V sealed Pb-acid battery and wiring harness for Anabat	$85
AE1205	Solar panel with mounting bracket 5 watt, Pmax 17.5V  @ 280mA, 8" x 11"	$120
AE1210 (recommended)	Solar panel with mounting bracket 10watt, Pmax 17.5V @ 600mA, 12" x 14"	$180
	replacement parts
	reflector with SS hardware	$14
	Aluminum bracket, styles 1a, 1b, or 1c	$23
	Aluminum bracket style 3b	$30
	Shroud coupler with hardware	$14

 

 <products index> <home> <top> <mail to: info@emesystems.com>